Skip to main content

Nokia X3-02 Touch Not Working Problem

Nokia X3-02 Touch Problem Solution.
At touch connector cheack marked point 
polarity.if polarity is ok then replace touch
digitizer with new .
If problem not solved then mach the touch side 
connector same as pcb side touch connector xr yt gnd xl yb.
now check these green marked parts as picture shown below.
Normal rehot or change touch controler ic of touch problem
not solve but first 100%confurm that touch ic not working
and problem ocured in touch ic.
how to check touch on sunwa multi meter.
prob one on xr and prob 2 on yt now touch on touch screen
and check meter show you polarity when you touch the touch screen.
same way to chek xl and yb in many touch like as chania and nokia
note these mathed is for not digitizer touch this is for only non digitizer touch pad
like as chaina n8 touch.
if touch digitizer use ic on strip you cannot check her by multi meter.
best way to change the touch understood the xr -yt -gnd-xl-yb point ways
from connector and touch connector side.
touch digitizer  ic use 3-7 volts on big brown capistor first check 
that ic volts come properly.
i hope you understood my tips for solving the touch problems
in many touch mobile phones.
Nokia x3-02 touch ic problem
 

Comments

Popular posts from this blog

Nokia E71 Power Button ways Jumper

Nokia E71 Power on/off Switch Ways Jumper

NOkia X1-01 Battery Connector Ways

NOkia X1-01 Battery Connector Solution Ways nokia x1 01 battery connector jumper nokia x1 01 battery connector solution nokia x1-01 battery connector ways nokia x1-01 battery connector jumper solution nokia x1 01 battery connector review