Skip to main content

Nokia Asha 305 Signal Problem Solution

Nokia Asha 305 Signal Problem.No Service Problem Solution
first conform that your Antena terminal is a 
connected with pcb antena points.
if problem not solved then replace the pa signal ic
with new or confurm ok pa ic with old or dead 
mother board of same number pa  ic like as nokia x2-02 
pcb use this pa ic and many other board come with
this pa ic.
change this with cearfully and set it on pcb corect
position as same of old pa ic location.
remember old ic location on pcb and then 
remove for changing with other pa ic.
this is 100%tested by me you see in picture 
pa removed to change for other pa ic.
Asha 305 Signal Problem Solution
 

Comments

Popular posts from this blog

Nokia E71 Power Button ways Jumper

Nokia E71 Power on/off Switch Ways Jumper

NOkia X1-01 Battery Connector Ways

NOkia X1-01 Battery Connector Solution Ways nokia x1 01 battery connector jumper nokia x1 01 battery connector solution nokia x1-01 battery connector ways nokia x1-01 battery connector jumper solution nokia x1 01 battery connector review